The Dynatrac 3 inch Suspension Lift is designed for Jeep JK owner's demanding the ultimate in performance and ride quality, without the larger stance you find in bigger lift systems on today's market. Dynatrac's Jeep Wrangler JK 3 inch lift system is engineered with front and rear dual rate progressive wound springs which is the foundation for on and off-road performance and suspension articulation.

The dual rate design gives you a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottom out control. Dynatrac 2.0 EnduroSport shocks add the finishing touch with OE mounting, aircraft grade components, and vehicle specific valving.

Together the combination of Dynatrac dual rate coils and 2.0 EnduroSport shocks adds 30 percent more wheel travel over stock, helping you rock crawl safer or soak up larger terrain at higher speeds keeping those wheels on the ground. This Dynatrac 3 inch JK lift system is designed from the ground up to give the 07-18 Jeep Wrangler JK's the best performance, suspension handling / ride quality, and clearance for 33 inch tall tires (35 inch tall with installation of aftermarket high-clearance fenders).

Features and Benefits:

• Adds 30 percent More Wheel Travel over Stock
• Dual Rate Coil Springs Front and Rear
• Includes High Performance Re-buildable / Re-valvable Dynatrac 2.0 EnduroSport shocks
• Level Stance Front to Rear
• Lifetime Guarantee that Coil Springs Wont Sag
• No Welding or Cutting
• Out Articulates Most Long Arm Kits of Comparable Height
• Vehicle can be Returned Back to Stock

Details:

• Bushings Included: Yes
• Coil Spring End 1 Type: Closed
• Coil Spring End 2 Type: Closed
• Coils Quantity Front: 2
• Coils Quantity Rear: 2
• Grade Type: Performance
• Maximum Lift Front: 3 Inch
• Maximum Lift Rear: 2.0 Inch
• Mounting Hardware Included: Yes
• Shocks Included: Yes
• Spring Color: Black
• Spring Material: Steel
• Drive: 4WD
• Lift Height: 3.0 Inch
• Sold As: Each

Application Notes:

• 2007-2018 Jeep Wrangler (Front and Rear) (Drive: 4WD / Qualifier: Use Up To 33 (in) x 11.50 (in) Tires, Up to 35x12.50 (in) Tire with Minor Fender Trimming, May Require Part Number DT922013, Raises Front 3 (in), Raises Rear 2 (in) / Note: Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle., Recommended Aftermarket Wheel Size: 17x8.5 with 4.5 Backspace / -6mm Offset)

OEM Wheels & Tires Fitment: Yes|Recommended Aftermarket Tires: 33 inch x 11.50 inch (Larger 35 inch tire packages will fit with minor modifications or aftermarket high clearance fenders, test fitment recommended)|Recommended Aftermarket Wheels: 17x8.5 inch w/ 4.5 Backspace / -6mm Offset|Tech Note: 2-door models sit slightly taller than 4-door models but remain level when installed.|Tech Note: 2012-2018 JK models require use of Dynatrac Exhaust Extension Spacer, part # DT922011 or an aftermarket front drive shaft, Dynatrac part # DT922014.|Tech Note: Adjustable front and rear track bars may be required to realign the axles from left to right.|Tech Note: Dynatracs advertised lift heights are based around a typical JEEP JK build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.|Tech Note: May require front and rear alignment cam kits, Dynatrac part # DT922013.