The Dynatrac 3 inch Suspension Lift System 7 for the 2020-Up Jeep Gladiator JT is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. System 7 builds off of System 3 with upgraded 2.5 EnduroSport shocks for improved shock damping and heat dissipation.

This system includes 3 inch lift front dual rate coil springs, 1.5 inch lift triple rate rear coil springs, 2.5 EnduroSport shocks, bump stop spacers, adjustable front sway bar links and rear brackets, and all necessary hardware to complete the installation. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind.

With this combination of components, Dynatrac was able to increase wheel travel numbers by 3 inch in front and 2 inch in the rear, significantly improving the performance of the 2020-Up JT. The 3.0 Lift System allows or fitment of 35 inch tires when used with Dynatrac's recommended wheel specifications.

For users looking to install 37 inch tires, an optional extended bump stop spacer kit (Part # DT922071) is available. The Dynatrac 3 inch Suspension Lift System 7 is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.

Made for adding lift height, shock damping, wheel travel, and improved drivability.

Features and Benefits:

• 100 percent bolt-on system makes for an easy install
• 2.5 EnduroSport shocks with JEEP JL specific valving offer greater shock damping and performance
• 3 inch front lift height and 1.5 inch of rear lift over stock
• 3 inch front, 2 inch rear increase in wheel travel
• Adjustable front sway bar links and rear sway bar brackets eliminate sway bar bind
• Dual rate front coil springs and triple rate rear coils with lifetime guarantee against sagging/breakage
• Fits 35 inch tires (37 inch with optional extended bump stop spacer kit, Part # DT922071)
• Improves on and off-road ride quality over stock
• Tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind

Details:

• Bushings Included: No
• Coil Spring End 1 Type: Closed
• Coil Spring End 2 Type: Closed
• Coils Quantity Front: 2
• Coils Quantity Rear: 2
• Grade Type: Performance
• Maximum Lift Front: 3 Inch
• Maximum Lift Rear: 1.5 Inch
• Mounting Hardware Included: Yes
• Shocks Included: Yes
• Spring Color: Black
• Spring Material: Steel
• Drive: 4WD
• Sold As: Each

Application Notes:

• 2020-2024 Jeep Gladiator (Fuel: GAS & Drive: 4WD / Qualifier: Use Up To 35 (in) x 12.50 (in) Tires, For 37x12.50 (in) Tires Use Bump Stop Spacer Kit, Raises Front 3 (in), Raises Rear 1.5 (in))

OEM Wheels & Tires Fitment: Yes|Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: DT922071)|Recommended Aftermarket Wheels: 17x8.5 inch w/ 4.5 Backspace / -6mm Offset|Tech Note: Dynatrac's advertised lift heights are based around a typical JEEP JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.|Tech Note: JEEP Gladiator Mojave also requires heim spacer kit, part # DT9611070|Tech Note: Springs are NOT rated for use with models equipped with EcoDiesel engines.